New:The AI Integration Day: one day at your office to put AI to work.The AI Integration Day

Discover

Connect your software or replace it?

When your software doesn't talk to each other, someone bridges the gap by hand: double data entry, Excel files that act as relays, errors. Often, all it takes is linking what you already have. Here's how to spot it, what can be connected and when replacement is still the right choice.

Connecter ses logiciels ou les remplacer?

An order comes in by email. Someone enters it in the sales software. Then retypes it in the accounting software. Then adds it to the production Excel file, because production only looks at that file.

Nobody decided it would work this way. It happened one piece of software at a time. Each one was chosen for a good reason, and each one does its job well. The problem is that they each do it on their own.

The reflex is to look for new software that would do everything. Sometimes that's the right answer. But often, the simplest solution is to connect what you already have.

How can you tell your software isn't talking to each other?

If someone retypes the same information from one screen to another, your software isn't talking. It's the simplest sign, and you find it everywhere: the customer's name, the order number, the hours on a job site, a delivery address.

The tools already exist. A human is the bridge between them. That bridge holds as long as the right person is there. When they go on vacation, invoicing waits.

Sometimes the sign is less visible: a spreadsheet someone updates every morning from 3 screens, or an email asking "can you send me the file?" that comes back every week. If the information already exists somewhere and someone rebuilds it by hand, that's a relay.

Examples

  • The same information entered 2 or 3 times in different software
  • An Excel file that acts as a relay between 2 systems
  • An export to run every Friday that only one person knows how to do
  • Numbers that don't match from one report to the next
  • The question "where is this at?" several times a day
The same order, entered 3 times. On the third, an error slipped in and nobody noticed.

How much does double data entry really cost?

More than you think, because a small task repeated all day ends up taking real hours, and every retyping is a chance to make a mistake.

Do the math with your own numbers. For example, if retyping an order takes 5 minutes and you get 20 a day, that's 100 minutes a day, more than 8 hours a week. It's an assumption: redo the math with your own numbers.

There's also what's harder to calculate: the mistyped quantity that goes out to the customer, the invoice sent late because the information hadn't arrived, the Monday report that has to be checked twice.

And the person doing the retyping knows your customers and your files. Their time is worth more than copy and paste.

A fictional example: 5 minutes per order, 20 orders a day. Redo the math with your own numbers.

What does it mean to connect your software?

Connecting your software means making sure information entered once gets everywhere it needs to go on its own. The order entered in the sales software shows up in accounting and in production, without anyone retyping it.

Most of today's software has a door built in to exchange its data with other software. The work is to connect those doors together, with the right rules: what to send, when and what to do if something goes wrong.

The problem isn't always that the software is bad. It's often that each tool works on its own.

Connecting doesn't mean plugging everything into everything. You only link what actually flows, in the direction it flows: the order goes from sales to accounting, not the other way around. The fewer the links, the easier they are to follow.

Examples

  • A request received through your website's form creates the customer record and alerts the right person
  • An accepted quote becomes a project, then an invoice, without being retyped
  • Hours entered in the field go to payroll and invoicing
  • A dashboard reads your software and shows today's numbers, with no file to compile
The same order, entered only once. The other software updates itself.

Can AI connect your software?

Yes, especially where the information isn't neatly organized. A standard connection works well when data is clean and always in the same format. But a good part of what comes into an SMB arrives by email, as a PDF or as a photo.

That's where AI helps. It reads the purchase order sent as a PDF, finds the customer and the items, then prepares the order in your software. When it isn't sure, for example with an item it doesn't recognize, it flags it instead of guessing. A person checks and approves. AI handles the handoffs. Humans make the important decisions.

The assistants your team may already use, like Claude, ChatGPT, Copilot or Gemini, can also be connected to your tools. You ask them "where is this customer's order at?" and they find the answer in your software, instead of someone going through every screen.

To see what it looks like in your business, that's the idea behind our AI integration day: one day with your team, in your tools.

AI reads the purchase order received as a PDF and prepares the order. Nothing goes into the system without Name's approval.

When should you replace software instead of connecting it?

When the software itself is the blocker, not the link between tools. Connecting a tool that no longer does the job is building a new bridge to a house that's falling down.

Here are the cases where replacement deserves a serious look. And if you do replace, it can be done without stopping the business: we told that story in Switching platforms without closing up shop.

A replacement doesn't rule out connections: the new software will also need to talk to the others. Might as well choose it with that in mind.

  1. It keeps your data locked in

    There's no way to get information out of it, except by hand. If the software can't exchange anything, there's nothing to connect.

  2. It no longer evolves

    The vendor no longer updates it, or it only runs on an old computer. Every month that goes by adds a security risk.

  3. Your team works around it

    When everyone has their own file on the side to do what the software doesn't, the software is the problem, not the links.

  4. The links would cost more than the software

    If every connection is there to make up for the weaknesses of a fragile tool, the money may be better spent on a replacement.

Connect or replace: the question is about the software, not the links.

Where do you start to connect your software?

With the handoff that hurts the most, not with a big plan. For one week, note every time someone retypes information from one tool to another. The handoff that comes up most often, or causes the most errors, is your first candidate.

For a simple link between 2 common tools, an automation tool like Zapier or n8n may be enough. For anything at the heart of your operations, like orders, invoicing or customer data, you need to plan for what happens when a link breaks: who gets alerted, what gets picked up again, what is protected.

A link that breaks silently is worse than double data entry. Double entry, at least, someone can see. Also keep one person responsible for each link. Not to watch it all day: to know who to call when it breaks.

To put a number on each handoff before choosing, see 5 steps to automate processes in an SMB. And start small: one connection that works beats a big project that's waiting.

Frequently asked questions.

How do you eliminate double data entry between 2 software tools?

By connecting them so information entered in one gets to the other on its own. Most recent software has a door built in to exchange its data. For a simple link, an automation tool may be enough. For a process at the heart of your operations, it's better to have a link designed with clear rules and an alert when it breaks.

Can you connect software that wasn't made to work together?

Often, yes. If each tool can exchange its data, they can be linked, even if they come from different vendors. When information arrives as a PDF, by email or as a photo, AI can read it and prepare it for the right software, with a person who approves.

Is it better to connect your software or buy one that does everything?

If your software does its job well, connecting it is often simpler and less disruptive for your team than a complete change. Replacement becomes the right choice when the software keeps its data locked in, no longer evolves or forces your team to work around it.

Can AI replace the connections between my software?

It complements them. A standard connection carries neatly organized data. AI helps where information isn't: a purchase order as a PDF, an email, a photo. It prepares the work and a person approves what matters.

Is it risky to connect your software?

Not if it's done well. You have to decide what data flows, who has access to it and what happens when a link breaks: who gets alerted and how the information is picked up again. The real risk is a link that breaks silently.

Before you shop for new software, look at where your people retype information.

Every retyping is a bridge a human holds up at arm's length. Very often, that bridge can be built once and for all, with the software you already have.

Read next

An idea in mind?

Let’s chat!

By submitting this form, I agree to the privacy policy.